LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Series.Gray >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Pad Switch >> Installation

Steering Pad Switch: Installation

  1. Installation of steering pad switch ASSY
    1. Fit in the 4 tabs and install the steering pad switch ASSY.
    2. Install the two screws.
    3. Fit in the guide.
    4. Connect the connector to the spiral cable SUB-ASSY.
  2. Installation of the driver's airbag module (Refer to INSTALLATION )
  3. Connection of the battery ground terminal Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
  4. Inspection of airbag warning light (Refer to AIRBAG WARNING LIGHT ILLUMINATION PATTERN )
scientia non olet · About LEMON Manuals