Alternator (FA20): Assembly

Installation of IC regulator

Courtesy of SUBARU OF AMERICA, INC.
1. Install the IC regulator in place with the 3 bolts.
  Standard value: Bolt A
  
  T=2.0N.m {20kgf.cm}
  
  Bolt B
  
  T=3.9N.m {40kgf.cm}
2. Install the brush ASSY in place with the 2 bolts.
  Standard value: T=2.0N.m {20kgf.cm}
  
  CAUTION: Push the brush into the brush holder while holding the brush with fingers or a socket wrench of the correct size to install the brush ASSY in place.
3. Install the rear cover.
4. Install the terminal B: with the nut.
  Standard value: T=8.9N.m {90kgf.cm}
5. Install the cover.