Drive Pinion Shaft Assembly: Inspection
- Make sure that all component parts are free of scratches, holes and other faults.
- Check the tooth contact. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>DRIVE PINION SHAFT ASSEMBLY>ADJUSTMENT .
- Apply differential gear oil to the taper roller bearing and rotate the bearing to check for noise or dragging, etc.
- Check the bearing preload of the drive pinion.CAUTION: Before measuring, apply differential gear oil to the roller part of taper roller bearing, and rotate it several times.
Starting torque:
14.3 - 46.4 N (1.5 - 4.7 kgf, 3.2 - 10.4 lbf)