Multi-function Display (MFD): Removal

1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Remove the grille ventilation assembly center. Ref. to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE ASSEMBLY .
3. Remove the switch assembly hazard.

   Courtesy of SUBARU OF AMERICA, INC.

4. Remove the grille speaker assembly CTR.

   Courtesy of SUBARU OF AMERICA, INC.

5. Remove the grille speaker side.

   Courtesy of SUBARU OF AMERICA, INC.

   NOTE: For the grille speaker side RH, disconnect the connector.
6. Remove the trim panel assembly A pillar. Ref. to EXTERIOR/INTERIOR TRIM>UPPER INNER TRIM>REMOVAL .
7. Remove the multi-function display.
   CAUTION: Be careful not to damage the multi-function display or instrument panel.
   1. Remove the screws and release the clip.
   2. Pull the multi-function display assembly toward yourself, and disconnect the connector.

      Courtesy of SUBARU OF AMERICA, INC.

   3. Remove the screws and then remove the multi-function display.

Courtesy of SUBARU OF AMERICA, INC.