Second Seat: Installation

Install the second-row seats.
CAUTION:
- Be careful not to damage the vehicle when bringing the seat in the vehicle.
- The LH side of bench type is heavy. When removing and installing them, work in a team of two or more persons.
- For models with seat heater, connect the seat heater connector.
- After installing the second-row seat, check the following items.
  - Each seat belt operates properly.
  - No harnesses are caught anywhere.
  - Each seat moves smoothly in sliding, reclining and walk-in mechanism.
Tightening torque:

Refer to "COMPONENT" of "General Description" for the tightening torque. Ref. to SEATS>GENERAL DESCRIPTION>COMPONENT>SECOND-ROW SEATS .
Install the cover bolt second front and the rail cover rear.
Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .