LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Rear Gate System >> Power Rear Gate Driver's Switch >> Removal

Power Rear Gate Driver's Switch: Removal

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>SAFETY .
  2. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the power rear gate driver's switch.
    1. Release the claws, and then remove the power rear gate driver's switch (a).
    G12401637Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals