Inspection Mode 3
| DTC | Item | Note |
|---|---|---|
| B2606 | Power Seat Position Sensor Circuit low | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of Power Seat Memory. Ref. to COMMON (diag)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of Power Seat Memory to check that there is no DTC displayed. Ref. to POWER SEAT MEMORY (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.
After solving the DTC, repeat from step 1. - Operate the power seat switch. (Any of slide/reclining/lifter/tilt)
- Turn the ignition switch ON → OFF, and wait for 45 seconds or more.
- Turn the ignition switch OFF → ON, and wait for 5 seconds or more.
- Using the Subaru Select Monitor, read the DTC of Power Seat Memory to check that there is no DTC displayed. Ref. to POWER SEAT MEMORY (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.