LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Audio >> Removal

Entertainment System: Audio: Removal

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the grille ventilation assembly center. Ref. to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE ASSEMBLY .
  3. Remove the switch assembly hazard. Ref. to LIGHTING SYSTEM>HAZARD SWITCH>REMOVAL .
  4. Remove the audio assembly.
    1. Remove the screws.
    2. Release the clips and disconnect the connector, and then remove the audio assembly.
    G13201851Courtesy of SUBARU OF AMERICA, INC.
    NOTE: For models with telematics, the data communication module is attached on the upper side of the audio assembly.
  5. Remove the backup unit.
  6. Remove the data communication module. Ref. to ENTERTAINMENT & MONITORING>DATA COMMUNICATION MODULE>REMOVAL>DATA COMMUNICATION MODULE .
  7. Remove the audio bracket.
    1. Remove the screws, and then remove the audio bracket.
    G13201852Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Remove the screws on LH side in the same procedure as on the RH side.
scientia non olet · About LEMON Manuals