LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostics) (1 Of 4) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0111: Intake Air Temperature Sensor 1 Circuit Range/Performance Bank 1 >> Execution Condition

Execution Condition

Diagnosis 1 

SECONDARY PARAMETERS AND EXECUTION CONDITION

Secondary parameters Execution condition
Battery voltage 10.9 V or more
Soaking time 21600 s or more
Block heater judgment Completed
Block heater operation Not in operation
SECONDARY PARAMETERS AND EXECUTION CONDITION - DIAGNOSIS 2

Secondary parameters Execution condition
Battery voltage 10.9 V or more
Engine coolant temperature 60°C (140°F) or more
Integrated value of intake air amount 5500 g (194 oz) or more
Number of experiences under following driving conditions 3 times or more
  • Duration of driving condition 1
1000 ms or more
Vehicle speed 40 km/h (24.9 MPH) or more
and
Amount of intake air
10 g/s (0.4 oz/s) or more
  • Duration of driving condition 2
15 s or more
Vehicle speed Less than 4 km/h (2.5 MPH)