LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX STI >> Repair and Diagnosis >> Transmission >> M/T Clutch System >> Clutch Switch >> Removal

Clutch Switch: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>NOTE>BATTERY
    NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
  3. Remove the instrument panel lower cover. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL
  4. Remove the knee airbag module. Ref. to AIRBAG SYSTEM>Knee Airbag Module>REMOVAL
  5. Disconnect the connector from the clutch switch and clutch start switch.
  6. Remove the clutch switch and clutch start switch.
scientia non olet · About LEMON Manuals