LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX STI >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System (STI) >> Fuel Filler Pipe >> Removal

Fuel Filler Pipe: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION: Be careful not to spill fuel.
  1. Release the fuel pressure. Ref. to FUEL INJECTION (FUEL SYSTEMS) (STI)>Fuel>PROCEDURE>RELEASING OF FUEL PRESSURE .
  2. Drain fuel. Ref. to FUEL INJECTION (FUEL SYSTEMS) (STI)>Fuel>PROCEDURE>DRAINING FUEL (WITH SUBARU SELECT MONITOR) .
  3. Disconnect the ground cable from battery.
  4. Open the fuel filler lid and remove the fuel filler cap.
  5. Turn the fuel filler pipe protector in the direction of the arrow to unlock and remove it.
    G10264924
  6. Remove the rear sub frame assembly. Ref. to REAR SUSPENSION>Rear Sub Frame>REMOVAL .
  7. Remove the rear mud guard RH. Ref. to EXTERIOR/INTERIOR TRIM>Mud Guard>REMOVAL .
  8. Disconnect the fuel filler hose (A) and evaporation hose (B) from the fuel filler pipe assembly.
    G10264925
  9. Remove the bolts and nuts which secure the fuel filler pipe assembly to the vehicle.
    G10264926
  10. Remove the fuel filler pipe assembly from the underside of the vehicle.
scientia non olet · About LEMON Manuals