LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX STI >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostics) (1 Of 4) (STI) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0111: Intake Air Temperature Sensor 1 Circuit Range/Performance Bank 1 >> Diagnostic Method

Diagnostic Method

Judge as NG when Diagnosis 1 or Diagnosis 2 becomes NG.

Diagnosis 1 

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria Threshold Value
|Intake air temperature 30 sec. after engine start - Engine coolant temperature at engine start| > Value of Map 3
|Intake air temperature 30 sec. after engine start - Ambient air temperature 30 sec. after engine start| > Value of Map 4
TEMPERATURE SPECIFICATION - MAP 3

Ambient temperature
°C (°F)
-30
(-22)
30
(86)
45
(113)
60
(140)
|Intake air temperature 30 sec. after engine start - Engine coolant temperature at engine start|
°C (°F)
12
(53.6)
12
(53.6)
22
(71.6)
22
(71.6)
TEMPERATURE SPECIFICATION - MAP 4

Ambient temperature
°C (°F)
-30
(-22)
30
(86)
45
(113)
60
(140)
|Intake air temperature 30 sec. after engine start - Ambient air temperature 30 sec. after engine start|
°C (°F)
20
(68)
20
(68)
32
(89.6)
32
(89.6)

Time needed for diagnosis:  Less than 1 second

Diagnosis 2 

Judge as NG when the following conditions are established.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria Threshold Value
Output voltage difference between Max. and Min. < 0.02V (Equivalent to approximately 0.5°C (0.9°F) near 25°C (77°F))

Time needed for diagnosis:  Less than 1 second

Malfunction indicator light illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.