LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (Except For STI)) >> Chain Cover >> Assembly

Chain Cover: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the camshaft position sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (EXCEPT FOR STI)>Camshaft Position Sensor>INSTALLATION .
  2. Install the oil control solenoid. Ref. to FUEL INJECTION (FUEL SYSTEMS) (EXCEPT FOR STI)>Oil Control Solenoid>INSTALLATION .
  3. Install the engine oil temperature sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (EXCEPT FOR STI)>Engine Oil Temperature Sensor>INSTALLATION .
  4. Install the oil pressure switch. Ref. to LUBRICATION(EXCEPT FOR STI)>Oil Pressure Switch>INSTALLATION .
  5. Install the PCV hose assembly No. 1. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (EXCEPT FOR STI)>PCV Hose Assembly>REPLACEMENT>PCV HOSE ASSY NO. 1 .
  6. Install the oil filler cap.
    G09480302Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals