LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX STI Limited >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System (STI) >> Camshaft Position Sensor >> Inspection >> Camshaft Position Sensor (Method With Oscilloscope)

Camshaft Position Sensor (Method With Oscilloscope)

  1. Prepare an oscilloscope.
  2. Remove the glove box. Ref. to EXTERIOR/INTERIOR TRIM>Glove Box>REMOVAL .
  3. Connect the probe to ECM connector.
    G12437294
    CAMSHAFT POSITION SENSOR TERMINAL NO. PROBE
    Intake RH (B137) No. 24 +
    LH (B137) No. 16 +
    Exhaust RH (B137) No. 23 +
    LH (B137) No. 29 +
    RH and LH (B134) No. 3 -
  4. Start the engine and let it idle.
  5. Check the waveforms and voltage.
    NOTE: For waveform and voltage, refer to "Engine Control Module (ECM) I/O Signal". Ref. to ENGINE (DIAGNOSTICS) (STI)>Engine Control Module (ECM) I/O Signal>ELECTRICAL SPECIFICATION .
  6. After inspection, install the related parts in the reverse order of removal.
scientia non olet · About LEMON Manuals