LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX STI Limited >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System (STI) >> Joint Pipe >> Removal

Joint Pipe: Removal

CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle.
  3. Remove the under cover. Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>REMOVAL .
  4. Remove the front oxygen (A/F) sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (STI)>Front Oxygen (A/F) Sensor>REMOVAL .
  5. Remove the exhaust manifold RH lower cover.
    G05661023
  6. Remove the bolts and nuts which hold exhaust manifold RH onto joint pipe.
    G04998841
  7. Remove the center exhaust pipe. Ref. to EXHAUST(STI)>Center Exhaust Pipe>REMOVAL .
  8. Remove the turbocharger. Ref. to INTAKE (INDUCTION) (STI)>Turbocharger>REMOVAL .
  9. Take off the joint pipe in the upward direction.
scientia non olet · About LEMON Manuals