LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension System >> Rear Shock Absorber >> Disposal

Rear Shock Absorber: Disposal

CAUTION:
  • Before discarding the strut COMPL and the shock absorber COMPL, be sure to wear goggles to protect eyes from gas, oil and cutting powder.
  • Do not disassemble the strut COMPL and the shock absorber COMPL or throw them into flames.
  • When discarding the strut COMPL and the shock absorber COMPL filled with gas, drill a hole on them to purge the gas.
  1. Place the shock absorber on a level surface with the piston rod fully expanded.
  2. Make a hole into the specified position 30 mm (1.18 in) deep using a drill with 2 - 3 mm (0.08 - 0.12 in) diameter.
    G06343231
scientia non olet · About LEMON Manuals