LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Front Arm >> Assembly >> Bushing Rear - Front Arm

Bushing Rear - Front Arm

  1. Before installation, inspect the following items and replace any faulty part with a new one.
    • Check the front arm assembly for damage or cracks, and replace if defective.
    • Visually check the bushing for abnormal cracks, fatigue or damage.
    • Visually check the dust cover on the ball joint for damage.
  2. Using the ST and a press, install the busing rear - front arm.
    CAUTION: Install with the longer inner cylinder of the pillow ball bushing facing upward and the shorter facing downward.
    G12443175

    Preparation tool:

    ST1: INSTALLER & REMOVER (20099AE020)

    ST2: HOUSING STAND (28099PA010)

    G12443176
scientia non olet · About LEMON Manuals