LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (STI)) >> Tumble Generator Valve Assembly >> Removal

Tumble Generator Valve Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the intake manifold. Ref. to FUEL INJECTION (FUEL SYSTEMS) (STI)>Intake Manifold>REMOVAL .
  3. Disconnect the connector from the tumble generator valve assembly.
    G08538694
  4. Remove the fuel injector. Ref. to FUEL INJECTION (FUEL SYSTEMS) (STI)>Fuel Injector>REMOVAL .
  5. Remove the tumble generator valve assembly from the intake manifold.
    G06344612
scientia non olet · About LEMON Manuals