LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (STI)) >> Engine Control Module (ECM) >> Removal

Engine Control Module (ECM): Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the glove box. Ref. to EXTERIOR/INTERIOR TRIM>Glove Box>REMOVAL .
  3. Disconnect the connectors from the ECM and driver's control center differential control module.
    G10264880
  4. Push down the claws, and remove the relay block.
  5. Remove the bolts and nuts, and remove the ECM.
    G10264881
  6. Remove the driver's control center differential control module.
    G10264882
scientia non olet · About LEMON Manuals