LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (STI)) >> Electronic Throttle Control Relay >> Inspection

Electronic Throttle Control Relay: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check that the electronic throttle control relay has no deformation, cracks or other damages.
  2. Measure the resistance between electronic throttle control relay terminals.
    G07909727
    TERMINAL NO. STANDARD
    1 and 2 1 Ω or more
    3 and 4 93.8 - 136.4 Ω (when 20°C (68°F))
  3. Connect battery positive terminal to terminal No. 3 and battery ground terminal to terminal No. 4, and measure the resistance between the electronic throttle control relay terminals.
    G06344746
    TERMINAL NO. STANDARD
    1 and 2 Less than 1 Ω
scientia non olet · About LEMON Manuals