LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (STI)) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the bolt which secures crankshaft position sensor to oil pump.
    G08538738
  3. Remove the crankshaft position sensor, and disconnect the connector from the crankshaft position sensor.
    G08538739
scientia non olet · About LEMON Manuals