LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Control System (Diagnostics - Introduction) (STI)) >> Drive Cycle >> Procedure >> Drive Cycle Ab

Drive Cycle Ab

WARNING: This page is about a different variant/trim than selected.
DTC Item Condition
P0244 TURBOCHARGER/SUPERCHARGER WASTEGATE SOLENOID "A" RANGE/PERFORMANCE Full warm-up (TYPE RA)

Diagnostic procedure: 

WARNING: When performing the drive cycle AB on the public road, be very careful of the traffic condition and the safe driving must be the high priority.
  1. Using the Subaru Select Monitor, perform the clear memory for «Engine». Ref. to ENGINE (DIAGNOSTICS) (STI)>Clear Memory Mode>OPERATION .
  2. Drive according to the drive pattern described below.
    G12456670Courtesy of SUBARU OF AMERICA, INC.
  3. Read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to ENGINE (DIAGNOSTICS) (STI)>Read Diagnostic Trouble Code (DTC)>OPERATION .