LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel Injection System) >> Oil Control Solenoid >> Removal >> Intake >> LH Side

LH Side

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the reservoir tank. Ref. to COOLING (H4DOTC)>RESERVOIR TANK>REMOVAL
  3. Remove the clip securing the engine wiring harness.
    G14601025Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the connector (A) and remove the oil control solenoid.
    G14601026Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the O-ring and back-up ring from the oil control solenoid.
scientia non olet · About LEMON Manuals