LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System (Except For STI) >> Manifold Absolute Pressure And Intake Air Temperature Sensor >> Removal

Manifold Absolute Pressure And Intake Air Temperature Sensor: Removal

  1. Remove the collector cover. Ref. to INTAKE (INDUCTION) (EXCEPT FOR STI)>Collector Cover>REMOVAL .
  2. Disconnect the ground terminal from battery sensor. Ref. to NOTE>BATTERY .
  3. Disconnect the connector (A) from the manifold absolute pressure & intake air temperature sensor, and remove the manifold absolute pressure & intake air temperature sensor from the intake manifold.
    G10266236
scientia non olet · About LEMON Manuals