LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System (Except For STI) >> Fuel Injector >> Removal >> Fuel Injector RH

Fuel Injector RH

CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from the pipes using a container or cloth.
  1. Disconnect the ground terminal from battery sensor. Ref. to NOTE>BATTERY .
  2. Remove the high-pressure fuel delivery pipe assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (EXCEPT FOR STI)>High Pressure Fuel Delivery Pipe>REMOVAL>HIGH-PRESSURE FUEL DELIVERY PIPE ASSY .
  3. Disconnect the connector (A) from fuel injector, and remove the fuel injector pipe.
    G09479656
  4. Using scissors or the like, remove the rubber cover (A) from the fuel injector.
  5. Remove the holder (B) and spacer (C) from the fuel injector.
    G12444107
  6. Rotate the snap ring to remove it from the fuel injector.
    G12444108
  7. Using ST, remove the fuel injector from the cylinder head.

    ST 18356AA000

    INJECTOR REMOVER

    1. Set the ST so that its mark faces the center of the engine.
      G09479658
    2. Pinch the fuel injector groove (A) with the claw section (B) of ST.
      G09479659
    3. Press the ST to the cylinder head.
      G09479660
    4. Screw in the threaded section of the ST clockwise, and remove the fuel injector from the cylinder head.
      G09479661
scientia non olet · About LEMON Manuals