Basic Diagnostic Procedure: Procedure

Using the Check List for Interview, ask the customer the condition of how the trouble occurred. Ref. to COMBINATION METER (DIAGNOSTICS)>Check List for Interview>CHECK .

Did you interview the customer?

Yes Go to 2  .

No Interview the customer. Ref. to COMBINATION METER (DIAGNOSTICS)>Check List for Interview>CHECK .

Read the DTC of the CAN system using the Subaru Select Monitor. Ref. to LAN SYSTEM (DIAGNOSTICS)>Read Diagnostic Trouble Code (DTC)>OPERATION .

Are any DTCs displayed?

Yes Perform the diagnosis for the displayed DTCs. Ref. to LAN SYSTEM (DIAGNOSTICS)>List of Diagnostic Trouble Code (DTC)>LIST .

No Go to 3  .

Using the Subaru Select Monitor, read DTC of combination meter. Ref. to COMBINATION METER (DIAGNOSTICS)>Read Diagnostic Trouble Code (DTC) .

Are any DTCs displayed?

Yes Record the DTCs and time stamps, and perform the diagnosis for the displayed DTCs. Ref. to BODY CONTROL SYSTEM (DIAGNOSTICS)>List of Diagnostic Trouble Code (DTC)>LIST .

For time stamp, refer to "LAN SYSTEM". Ref. to LAN SYSTEM (DIAGNOSTICS)>General Description>CAUTION>TIME STAMP .

Go to  5.

No Go to 4  .

Check the operation of combination meter. Ref. to COMBINATION METER (DIAGNOSTICS)>System Operation Check Mode .

Is the check result OK?

Yes System is normal.

No Replace the combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>Combination Meter .

1. Perform the Clear Memory Mode.
2. Perform the Inspection Mode. Ref. to COMBINATION METER (DIAGNOSTICS)>Inspection Mode .
3. Using the Subaru Select Monitor, read DTC of combination meter.

Are any DTCs displayed?

Yes Perform the diagnosis for the displayed DTCs.

No Finish the diagnosis.