LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Rear Regulator And Motor Assembly >> Removal

Rear Regulator And Motor Assembly: Removal

  1. Disconnect the ground cable from battery. Ref. to NOTE>BATTERY
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the trim panel - rear door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>REMOVAL>REAR DOOR
  3. Remove the sealing cover - rear door.
  4. Remove the glass assembly - rear door. Ref. to GLASS/WINDOWS/MIRRORS>Rear Door Glass>REMOVAL 
  5. Remove the rear regulator and motor assembly.
    1. Disconnect the connector of the motor - rear.
      G08315168
    2. Remove the bolts, and then remove the regulator and motor assembly - rear.
      G10270870
scientia non olet · About LEMON Manuals