LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Power Amplifier >> Removal

Power Amplifier: Removal

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>BATTERY
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the rear seat cushion assembly. Ref. to SEATS>Rear Seat>REMOVAL
  3. Remove the trim panel - rear pillar UPR and the trim panel - rear pillar LWR. Ref. to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>REMOVAL
  4. Remove the trim panel assembly - rear shelf. Ref. to EXTERIOR/INTERIOR TRIM>Rear Shelf Trim>REMOVAL
  5. Remove the power amplifier assembly.
    1. Release the harness clips, and disconnect each connector.
    2. Remove the bolts, release the clips, and then remove the power amplifier assembly.
      G10270806
scientia non olet · About LEMON Manuals