LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Front Speaker >> Removal >> Tweeter

Front Speaker: Removal: Tweeter

  1. Disconnect the ground cable from battery. Ref. to NOTE>BATTERY
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the speaker assembly - tweeter.
    1. Affix protective tape (a) to the trim panel - front pillar UPR.
    2. Release the clips and claws, then detach the grille speaker side.
      NOTE: Remove the grille speaker side by using a plastic remover.
    3. Remove the screws.

      Preparation Tool: 

      Stubby screwdriver

    4. Disconnect the connector and remove the speaker assembly - tweeter.
      • Model without Eye-Sight assist monitor
        G12455929
      • Model with Eye-Sight assist monitor
        G12455930
scientia non olet · About LEMON Manuals