Check Speaker Output With Line Diag Mode

Model With 6.2 Inch Display 

1. Turn the ignition switch to ACC.
2. Press the button (a) to display the Audio OFF screen.
3. Touch the screen in order from (b) to (e).
   NOTE: Pressing the button (a) or turning the ignition switch from the OFF to ACC position can exit the Line Diag mode.
4. {Line Diag} screen is displayed.
5. Touch {Audio Check} on the {Line Diag} screen.
6. {Audio Check} screen is displayed.
7. Touch the {ON} key of {Speaker Check} to check speaker output.
   NOTE:

   • The speaker front left - front right - rear right - rear left will sound in order for 2 seconds each.
   • The speaker sounds at the maximum volume during speaker check.
   • Press the {BACK} key to return to the {Line Diag} screen.

Model With 7 Inch Display 

Operation is the same as that of navigation assembly, therefore, refer to "Navigation System". Ref. to ENTERTAINMENT & MONITORING>Navigation System>OPERATION>CHECK SPEAKER OUTPUT WITH LINE DIAG MODE