Electrical Specification
| Check with ignition switch ON . | ||||||
|---|---|---|---|---|---|---|
| Item | Measured terminal (Connector & Terminal No.) |
Measuring condition | Voltage (V) | Resistance (O) | ||
| Positive terminal | Ground terminal | |||||
| DCCD output | (B380) No. 15 | (B380) No. 32 | When differential is locked (when DCCD manual mode display is locked) | 5.5 - 8.0 | 1.2 - 2.5 | |
| When differential is free (When the parking brake is pulled) | Less than 0.5 | |||||
| DCCD power supply | (B380) No. 13 | Chassis ground | Ignition switch ON | 10 - 13 | - | |
| (B380) No. 14 | - | |||||
| Backup power supply | (B380) No. 12 | Chassis ground | - | 10 - 13 | - | |
| Ignition power supply | (B380) No. 11 | Chassis ground | Ignition switch ON | 10 - 13 | - | |
| DCCD relay | (B380) No. 7 | Chassis ground | Ignition switch ON | Less than 1.0 | - | |
| Mode change switch | (B380) No. 6 | Chassis ground | When the switch is not pressed | 8.0 or more | - | |
| When the switch is pressed | Less than 1 | - | ||||
| CAN communication signal (+) | (B380) No. 2 | Chassis ground | Ignition switch ON | Pulse signal | ||
| CAN communication signal (-) | (B380) No. 18 | Chassis ground | Ignition switch ON | Pulse signal | ||
| System ground circuit | (B380) No. 28 | Chassis ground | - | 0 | Less than 1.0 | |
| (B380) No. 29 | Chassis ground | |||||
| (B380) No. 30 | Chassis ground | |||||
| (B380) No. 31 | Chassis ground | |||||
| System ground circuit | (B380) No. 17 | Chassis ground | - | 0 | Less than 1.0 | |
| C.DIFF + switch | (B380) No. 22 | Chassis ground | When the switch is not pressed/is pressed | 8.0/1.0 | ||
| C.DIFF - switch | (B380) No. 4 | Chassis ground | When the switch is not pressed/is pressed | 8.0/1.0 | ||