LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostics) (4 Of 4) (Except For STI) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P2270: O2 Sensor Signal Biased/Stuck Lean Bank 1 Sensor 2 >> Execution Condition

Execution Condition

Secondary parameters Execution condition
Battery voltage ≥ 10.9 V
Sub feedback In operation
Amount of intake air ≥ 10 g/s (1.3 lb/m)
Estimated temperature of the rear oxygen sensor element ≥ 450°C (932°F)
Enable conditions at interrupt control are as follows
Air fuel ratio reduced from target air fuel ratio ≥ Value of Map
Continuous time when rear oxygen sensor output voltage is less than 0.55 V ≥ 5000 ms
OUTPUT VOLTAGE SPECIFICATION - MAP

Output voltage of rear oxygen sensor
(V)
0.00 0.15 0.20 0.40 0.60
Air fuel ratio reduced from target air fuel ratio
(%)
15 15 4 4 4