DTC P1C00: Battery Monitor Module "A" Performance: Notes
DTC detecting condition:
Immediately at fault recognition
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode Ref. to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>Clear Memory Mode>OPERATION
, and Inspection Mode Ref. to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>Inspection Mode>PROCEDURE
.
- CHECK DTC
.
Read DTC using the Subaru Select Monitor or a general scan tool. Ref. to ENGINE (DIAGNOSTICS) (EXCEPT FOR STI)>Read Diagnostic Trouble Code (DTC) .
Is DTC P1C00 displayed? (Current malfunction)
Yes: Replace the battery sensor. Ref. to STARTING/CHARGING SYSTEMS(EXCEPT FOR STI)>Battery Sensor .
No: Even if DTC is detected, it has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.