LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (Except For STI) >> Water Pipe Assembly >> Installation >> Water Pipe Assembly RH

Water Pipe Assembly RH

  1. Set the water pipe assembly RH on the engine, and connect the water pipe hose RH (B) to the oil pan upper.
  2. Install the bolt (A) which secures the water pipe assembly RH to the cylinder head RH.

    Tightening Torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

    G09480755
  3. Connect the water hose (A) to the water pipe assembly RH, and install the bolt (B) which secures the water pipe assembly RH to the cam carrier RH.

    Tightening Torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

    G09476398
  4. Install the front exhaust pipe. Ref. to EXHAUST(EXCEPT FOR STI)>Front Exhaust Pipe>INSTALLATION .
  5. Install the oil pipe assembly. Ref. to LUBRICATION (EXCEPT FOR STI)>Oil Pipe>INSTALLATION>OIL PIPE ASSY .
  6. Connect the ground terminal to battery sensor. Ref. to NOTE>NOTE>BATTERY .
  7. Fill engine coolant. Ref. to COOLING(EXCEPT FOR STI)>Engine Coolant>REPLACEMENT>FILLING OF ENGINE COOLANT .
scientia non olet · About LEMON Manuals