Auto Headlight Beam Leveler Control Module: Installation
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION
- Install the auto headlight beam leveler Control Module.
- Install the relay & fuse box.
Tightening Torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the fuse holder.
- Install the knee airbag module. Ref. to AIRBAG SYSTEM>Knee Airbag Module>INSTALLATION
Tightening Torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the cover assembly - instrument panel LWR driver.
- Connect the battery ground terminal. Ref. to NOTE>BATTERY
- Perform initialization and reinitialization of the auto headlight beam leveler system. Ref. to LIGHTING SYSTEM>Auto Headlight Beam Leveler System>PROCEDURE