LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Navigation System >> Operation >> Check Speaker Output With Line Diag Mode

Check Speaker Output With Line Diag Mode

  1. Turn the ignition switch to ACC.
  2. Press the button (b) twice with the button (a) pressed.
    G10272638
    NOTE: Pressing the button (c) for 3 seconds or more, or turning the ignition switch from the OFF to ACC position can exit the diagnostic mode.
  3. {Line Diag} screen is displayed.
    G10298690
  4. Touch {Audio Check} on the {Line Diag} screen.
  5. {Audio Check} screen is displayed.
    G10309136
  6. Touch the {ON} key of {Speaker Check} to check speaker output.
    NOTE:
    • The speaker front left → front right → rear right → rear left will sound in order for 2 seconds each.
    • The speaker sounds at the maximum volume during speaker check.
    • Press the {BACK} key to return to the {Line Diag} screen.
scientia non olet · About LEMON Manuals