LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 3.6R Touring >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr690) >> Intermediate Case >> Removal

Intermediate Case: Removal

  1. Remove the transmission assembly from vehicle body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Automatic Transmission Assembly>REMOVAL .
  2. Remove the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Extension Case>REMOVAL .
  3. Remove the parking pawl. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Parking Pawl>REMOVAL .
  4. Remove the rear drive shaft. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Rear Drive Shaft>REMOVAL .
  5. Remove the transfer clutch assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Transfer Clutch>REMOVAL .
  6. Remove the transfer reduction driven gear assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Transfer Reduction Driven Gear>REMOVAL .
  7. Remove the intermediate case.
    NOTE:
    • The total number of intermediate case mounting bolts is 14.
    • Inside the transmission is a single bolt (arrowed).
    G09482108Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the CVTF filter.
    G09482109Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the O-ring from the transmission case.
    G06654544Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals