LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 3.6R Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical System (H4DO)) >> Chain Cover >> Disassembly

Chain Cover: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil filler cap.
    G10262603Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the engine oil filter and the oil pump union. Ref. to LUBRICATION(H4DO)>Engine Oil Filter>REMOVAL
  3. Remove the oil pressure switch. Ref. to LUBRICATION(H4DO)>Oil Pressure Switch>REMOVAL
  4. Remove the engine oil temperature sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Engine Oil Temperature Sensor>REMOVAL
  5. Remove the oil control solenoid. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Oil Control Solenoid>REMOVAL
  6. Remove the camshaft position sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Camshaft Position Sensor>REMOVAL
scientia non olet · About LEMON Manuals