LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 3.6R Touring >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Front Hood Lock Assembly >> Removal

Front Hood Lock Assembly: Removal

  1. Open the front hood.
  2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DO)>Air Intake Duct>REMOVAL .
  3. Remove the bumper face - front. Ref. to EXTERIOR/INTERIOR TRIM>Front Bumper>REMOVAL .
  4. Remove the bracket - grille.
    G10272935Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the radiator upper brackets.
    G10276811Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the lock assembly - front hood.
    1. Remove the nuts and clips, and push the radiator to the rear to pull out the lock assembly - front hood through the clearance.
      G10272937Courtesy of SUBARU OF AMERICA, INC.
    2. Disconnect the release cable, and detach the lock assembly - front hood.
    G10272938Courtesy of SUBARU OF AMERICA, INC.
    NOTE: When disconnecting the release cable, refer to "FRONT HOOD OPENER" of "Remote Openers". Ref. to SECURITY AND LOCKS>Remote Openers>REMOVAL>FRONT HOOD OPENER .
scientia non olet · About LEMON Manuals