Malfunction Indicator Light Does Not Come On

Trouble symptom: 

When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate.

1. CHECK DTC. 

   Read DTC using the Subaru Select Monitor or a general scan tool. Ref. to ENGINE (DIAGNOSTICS) (H6DO)>READ DIAGNOSTIC TROUBLE CODE (DTC) 

   Is DTC for LAN system displayed? (Current malfunction) Ref. to LAN SYSTEM (DIAGNOSTICS)>Read Diagnostic Trouble Code (DTC)>OPERATION

   Yes:  Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Ref. to LAN SYSTEM (DIAGNOSTICS)>LIST OF DIAGNOSTIC TROUBLE CODE (DTC)

   No:  Replace the meter case assembly of combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER