LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (Diagnostics) >> Drive Cycle >> Procedure >> Drive Cycle G

Drive Cycle G

DTC Item Condition
P0708 TRANSMISSION RANGE SENSOR "A" CIRCUIT HIGH -

Diagnostic procedure: 

  1. Start the engine.
  2. Drive for three seconds at 16 km/h (10 MPH).
    NOTE: Drive in "D" range and "R" range.
scientia non olet · About LEMON Manuals