Drive Cycle D
| DTC | Item | Condition |
|---|---|---|
| P0713 | TRANSMISSION FLUID TEMPERATURE SENSOR "A" CIRCUIT HIGH | - |
| P0730 | INCORRECT GEAR RATIO | - |
| P0746 | PRESSURE CONTROL SOLENOID "A" PERFORMANCE/STUCK OFF | Perform the drive cycle D twice. |
| P0747 | PRESSURE CONTROL SOLENOID "A" STUCK ON | Perform the drive cycle D twice. |
| P0751 | SHIFT SOLENOID "A" PERFORMANCE/STUCK OFF | Perform the drive cycle D twice. |
| P0752 | SHIFT SOLENOID "A" STUCK ON | Perform the drive cycle D twice. |
| P0756 | SHIFT SOLENOID "B" PERFORMANCE/STUCK OFF | Perform the drive cycle D twice. |
| P0757 | SHIFT SOLENOID "B" STUCK ON | Perform the drive cycle D twice. |
| P0776 | PRESSURE CONTROL SOLENOID "B" PERFORMANCE/STUCK OFF | Perform the drive cycle D, then the drive cycle A, and perform the drive cycle D again. |
| P0841 | TRANSMISSION FLUID PRESSURE SENSOR/SWITCH "A" CIRCUIT RANGE/PERFORMANCE | - |
| P0961 | PRESSURE CONTROL SOLENOID "A" CONTROL CIRCUIT RANGE/PERFORMANCE | - |
| P0965 | PRESSURE CONTROL SOLENOID "B" CONTROL CIRCUIT RANGE/PERFORMANCE | - |
| P2757 | TORQUE CONVERTER CLUTCH PRESSURE CONTROL SOLENOID CONTROL CIRCUIT PERFORMANCE/STUCK OFF | Perform the drive cycle D twice. |
| P2758 | TORQUE CONVERTER CLUTCH PRESSURE CONTROL SOLENOID CONTROL CIRCUIT STUCK ON | Perform the drive cycle D twice. |
Diagnostic procedure:
- Start the engine.
- Drive in any driving pattern for 20 minutes. (Include driving at a constant legal speed (for 20 seconds) at least once.)