LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr580) >> Secondary Pressure Sensor >> Installation

Secondary Pressure Sensor: Installation

CAUTION:
  • Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.
  • After installing the secondary pressure sensor, adjust the CVTF level.
  1. Install the secondary pressure sensor.
    NOTE:
    • Use new O-rings.
    • Apply CVTF to the O-rings.

    Tightening torque: 

    39 N.m (4.0 kgf-m, 28.8 ft-lb)

  2. Connect the harness connector.
  3. Lower the vehicle.
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  5. Refill CVTF to adjust the CVTF level. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>CVTF .
scientia non olet · About LEMON Manuals