LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr580) >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

  1. Start and warm up the engine.
  2. Depress the brake pedal, and shift the select lever to "D" range.
  3. Shift the select lever to "P" or "N" range.
  4. Depress the brake pedal and hold it.
  5. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is idling. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS)>Subaru Select Monitor>OPERATION .

    Specification:

    Approx. 0.8 V

  6. Check "secondary pressure sensor voltage" with engine stopped and ignition switch turned on by using Subaru Select Monitor. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS)>Subaru Select Monitor>OPERATION .

    Specification:

    Approx. 0.5 V

scientia non olet · About LEMON Manuals