- Install the thrust bearing to the converter case.
NOTE:
Face the temper color surface to the converter case side.
Courtesy of SUBARU OF AMERICA, INC.
|
- Install the seal ring to the input shaft.
NOTE:
- Use new seal rings.
- When installing the seal rings, do not expand the seal rings too much.
- Apply CVTF to the seal rings.
Courtesy of SUBARU OF AMERICA, INC.
|
- Install the forward clutch assembly to the converter case.
Courtesy of SUBARU OF AMERICA, INC.
|
- Install the sun gear.
NOTE:
Face the end face of the sun gear to the reverse brake side as shown in the figure.
Courtesy of SUBARU OF AMERICA, INC.
|
- Install the thrust bearing to the sun gear.
NOTE:
Face the temper color surface to the reverse brake side.
Courtesy of SUBARU OF AMERICA, INC.
|
- Install the planetary carrier.
Courtesy of SUBARU OF AMERICA, INC.
|
- Install the thrust bearing.
NOTE:
Face the temper color surface to the reverse brake side.
Courtesy of SUBARU OF AMERICA, INC.
|
- Install the internal gear.
Courtesy of SUBARU OF AMERICA, INC.
|
- Install the thrust bearing to the internal gear.
NOTE:
Face the temper color surface to the reverse brake side.
Courtesy of SUBARU OF AMERICA, INC.
|
- Select a washer. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Forward Clutch Assembly>ADJUSTMENT .
- Install the reverse brake assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Reverse Brake Assembly>INSTALLATION .
- Install the primary pulley, secondary pulley and variator chain. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Primary Pulley and Secondary Pulley>INSTALLATION .
- Install the reduction drive gear. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Reduction Drive Gear>INSTALLATION .
- Install the transmission case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Transmission Case>INSTALLATION .
- Install the transmission control device. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Transmission Control Device>INSTALLATION .
- Install the oil strainer and oil pan. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Oil Pan and Strainer>INSTALLATION .
- Install the reduction driven gear assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Reduction Driven Gear>INSTALLATION .
- Install the transfer driven gear assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Transfer Driven Gear>INSTALLATION .
- Install the transfer clutch assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Transfer Clutch>INSTALLATION .
- Install the parking pawl. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Parking Pawl>INSTALLATION .
- Install the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Extension Case>INSTALLATION .
- Install the inhibitor switch. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Inhibitor Switch>INSTALLATION .
- Install the secondary speed sensor. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Secondary Speed Sensor>INSTALLATION .
- Install the primary speed sensor. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Primary Speed Sensor>INSTALLATION .
- Install the turbine speed sensor. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Turbine Speed Sensor>INSTALLATION .
- Install the transmission harness. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Transmission Harness>INSTALLATION .
- Install the control valve body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Control Valve Body>INSTALLATION .
- Install the air breather hose. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Air Breather Hose>INSTALLATION .
- Install the transmission assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Automatic Transmission Assembly>INSTALLATION .