LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Wheel >> Assembly

Steering Wheel: Assembly

CAUTION:
  • Securely install the switch and the cover - steering wheel LWR. Improper insertion of the pins or claws of the switch and the cover - steering wheel LWR may cause improper installation.
  • When installing the heater steering wheel and the cover - steering wheel LWR for models with steering heater, be careful of the following:
    • Attach the heater element to the cover - steering wheel LWR so that it is not twisted or does not interfere with switches.
    • Be careful not to allow the heater element to be caught in steering frame, unit and cover - steering wheel LWR.
  1. Install the MID switch.
  2. Install the steering heater switch and steering heater unit to the cover - steering wheel LWR. (Model with steering heater)
  3. Install the satellite switch.
  4. Install the cover - steering wheel LWR.
    NOTE: Secure the heater element on the cover - steering wheel LWR using double-sided tape. Refer to the figure below to attach the heater element and double-sided tape symmetrically.
    G12411053Courtesy of SUBARU OF AMERICA, INC.
  5. Install the cover - spoke.
  6. Install the paddle shift switch.
scientia non olet · About LEMON Manuals