LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control/Fuel System (H6DO)) >> Camshaft Position Sensor >> Removal >> Exhaust Side

Exhaust Side

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Lift up the vehicle.
  3. Remove the under cover. Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>REMOVAL .
  4. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor.
    • RH side
      G10263579Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      G10263580Courtesy of SUBARU OF AMERICA, INC.