LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (CVT Transaxle (Tr690)) >> Transfer Reduction Driven Gear >> Assembly

Transfer Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the new ball bearing (large) to reduction driven gear using the ST.

    ST 499277100 BUSHING 1-2 INSTALLER 

    NOTE:
    • Use a new ball bearing.
    • Install to the splines inside transfer reduction driven gear shaft.
    G06654536Courtesy of SUBARU OF AMERICA, INC.
  2. Install the new ball bearing (small) to reduction driven gear.
    NOTE: Use a new ball bearing.

    ST 499277100 BUSHING 1-2 INSTALLER 

    G06654536Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals