LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Outer Mirror Assembly >> Disassembly

Outer Mirror Assembly: Disassembly

CAUTION:
  • When removing the mirror - repair, be careful not to damage the back surface of mirror - repair with a flat tip screwdriver.
  • When installing the mirror - repair, insert the connector and clip securely.
  1. Operate the remote control mirror switch to face the mirror - repair upward.
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the mirror - repair.
    1. Using a flat tip screwdriver or similar tool, release the engagement shown in the figure, and slide the mirror - repair downward to remove.
      G11246118Courtesy of SUBARU OF AMERICA, INC.
    2. Disconnect the connector. (Model with mirror heater)
      G12408362Courtesy of SUBARU OF AMERICA, INC.
  4. Release the claws, and then remove the cover - cap outer mirror lower.
    G11246120Courtesy of SUBARU OF AMERICA, INC.
  5. Release the claws, and then remove the cover - cap outer mirror.
    CAUTION: Be careful not to apply excessive force when removing the cover - cap outer mirror, as the lower hooks may become damaged.
    G11246121Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the light assembly - side turn mirror. (Model with side turn signal light)
    1. Remove the screws and pull out the light assembly - side turn mirror to the front of the vehicle.
    2. Disconnect the connector and remove the light assembly - side turn mirror.
    G12408365Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals