LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (CVT Transaxle (Tr690)) >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Start and warm up the engine.
  2. Shift the select lever to "P" or "N" range.
  3. Depress the brake pedal and hold it.
  4. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is idling. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS)>Subaru Select Monitor>OPERATION .

    Specification:

    Approx. 0.8 V

  5. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is stopped and the ignition switch is turned on. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS)>Subaru Select Monitor>OPERATION .

    Specification:

    Approx. 0.5 V

scientia non olet · About LEMON Manuals